10–12 April (English language seminar) in Stuttgart, Germany · Introduction to gravure cylinder preparation and printing with demonstrations and practical exercises · Register now
Gravure at your fingertips
Stuttgart Media University is the only university in Europe which operates a complete gravure line, from cylinder preparation through to a rotogravure printing press. Hence, the cylinder preparation and gravure printing department at HdM is unique in European further and higher education. In the labs all aspects of gravure can be closely experienced and tried out, and the quality of all production steps can be tested with special measuring methods.
The introductory course offered here covers gravure in theory and practice, from the electro plating for copper plating of a cylinder, through surface processing and finishing, preparation of a layout and the subsequent electromechanical engraving process, to printing on several papers with different ink viscosities. Besides electromechanical engraving, all workflow processes for other modern gravure cylinder engraving procedures such as laser assisted etching and laser engraving are explained. The new developments of cylinder surfaces are touched.
All process steps are tried and tested on equipment in the cylinder preparation laboratory and in the gravure printing department. Participants will design a layout, help prepare and engrave a cylinder with it, and print it on different types of paper. These steps will be accompanied by quality control with the corresponding measuring equipment.
The course is designed to provide a practical overview of the whole process chain for employees of gravure printers, cylinder engravers and reproduction studios, from paper, substrate and ink manufacturers, and also for newcomers to the industry coming from a different field. This course does not include advanced operator training and so is not intended for the experienced technical staff from gravure printers.
The number of participants has been limited to 10 participants per course. This enables each participant to take an active “hands on” part in each production step, which will enable a better understanding of the complete process.
Hochschule der Medien Stuttgart
3 days, arrival the day before the seminar (9 April)
Employees from gravure production and supply chains needing a general overview of the process
ERA Non-Members: € 2.899,– (+VAT)
ERA Members: € 1.995,– (+VAT)
The seminar participation fees are per person. Fees include seminar participation, seminar documentation, hotel accommodation for 3 nights, day catering, 2 dinners and transfers from hotel and back.
Tuesday, 9 April 2024
Arrival of the participants at the hotel
Wednesday, 10 April 2024
09:00 › Arrival at Stuttgart Media University
09:10 › Welcome of the participants and tour through the technical departments of the Stuttgart Media University
10:30 › Introduction to the course at the Competence Center Gravure, Introduction to gravure printing and gravure cylinder production, Gravure printing applications and markets
13:00 › Mechanical structure of a gravure cylinder, Surface property of gravure cylinders, Structure of a gravure unit, Comparison of base copper and ballard skin process, Influences of substrate parameters onto form production, Gravure specific measurement instrumentation
15:00 › Function of electromechanical engraving, cell shapes, screen angle, screen width, image signal processing, preparation of a sample for a print form with job ticket, colour management for gravure printing, Xtreme/TransScribe
17:30 › End of first day of the seminar
Thursday, 11 April 2024
08:30 › Engraving of the prepared sample (2 cylinders), Quality control, Metrological acquisition of a gravure gradation
10:00 › Forme production with lasers, Direct engraving with laser, Etching with laser as mask generation tool
11:30 › Gravure inks – basics and composition, blending of inks for test print
14:00 › Mixing of the inks in the inks kitchen
15:00 › Substrates and specific applications in packaging
16:00 › Structure of gravure presses, Corona treatment, Drying, Print control devices: web tension, register and viscosity control
18:00 › End of second day of the seminar
Friday, 12 April 2024
8:30 › Colour theory and colour measurement for the evaluation of the prints
10:00 › Print with the two cylinders prepared on the previous day on the Rotomec MW 60 rotogravure packaging press with different speeds, substrates, doctor blade angles, viscosities and ink/extender ratio.
14:00 › Metrological and optical evaluation of the prints, generation and discussion of print gradations
Questions and answers
ca. 15:00 › End of seminar/departure
Closing date for registrations is 25 March 2024. The number of participants is limited to 10 only. Participation places will be allocated on a first come, first served basis.
Cancellations must be submitted in writing by 25 March 2024. In case of absence or late cancellation, the complete participation fee is to be paid. After this date, the registration fee is transferable but not refundable. In case of cancellation, regardless of the timing, the participant will be billed the accommodation costs that would be charged by the hotel if the room cannot be rebooked. ERA reserves the right to cancel, defer or modify the event proceedings without prior notice.